PMG 13A Rewireable Plug Top — Colours, Wiring & Certification Explained

Guanglong Electric Technical Team · Updated 2026-11-07

A moulded plug comes ready-made on its cable; a rewireable plug top waits for you to fit the cable yourself. That single difference splits the market in two: moulded plugs belong to factory-assembled appliances, while rewireable plug tops belong to electricians making up leads on site, OEM lines building equipment cables, and the repair trade replacing worn plugs. The PMG is our answer to that market — a 13 A BS 1363 rewireable plug top with brass terminals, a screw-type cord grip and a ceramic fuse, produced in six colour options on the same certified tooling.

PMG 13A rewireable plug top colour series: teal, black, white, orange, orange-black and white-black variants
The PMG colour series — six stock variants from the same BS 1363/A certified tooling: teal, black, white, orange, orange-black and white-black.

1. Rewireable vs Moulded: The Line That Splits the Market

Moulded plug Rewireable plug top (PMG)
Cable Fixed at the factory, cannot be replaced Fitted by the user — any length, any flex
Termination Crimped inside the moulding Screw terminals, open for inspection
Typical buyer Appliance OEMs, retail packs Electricians, OEM cable assemblers, maintenance trade
Certification focus Plug + cable as one assembled unit (BS 5733 for leads) Plug body certified to BS 1363-1; the finished lead references BS 5733
Failure mode Whole plug scrapped Re-terminate or swap the fuse — the body survives

The practical consequence: if your business makes, repairs or customises cables, rewireable plug tops are consumables — bought by the box, stocked on the shelf, specified by the job.

2. The PMG Spec, Line by Line

Spec Detail
Rating 13 A 250 V~ (MAX 2500 W)
Standard BS 1363/A — moulded markings: SAS02203 · SS 145 · MS 589/A
Approvals UKCA · CE · G-Mark · ISO 9001 factory
Body Flame-retardant PC, six colour options
Pins Solid brass, BS 1363-1 profile
Terminals Brass screw terminals, E/N/L marked
Cable retention Screw-type CORD GRIP clamp
Fuse 13 A ceramic (BS 1362) fitted
Packing 20 pcs/box · 12 boxes/ctn

The six colours are stock tooling variants, not custom-moulding jobs: teal, black, white, orange, orange-black and white-black. For distributors, that means colour-coding by product line or market without paying a mould fee; for OEM buyers, the housing accepts logo printing on the back panel.

BS 1363/A brass pins with UKCA CE markingsFUSED marking and CORD GRIP cable clampPMG wired open: colour-coded cores on E/N/L terminals, cord grip and 13A ceramic fuse20 pcs per box bulk packing

The same four views at a glance: certified pins, the cord grip, the internals, the box. Zoom any of them on the PMG product page.

3. Wiring It Right: Five Steps, Three Safety Points

Five steps:

  1. Loosen the cord-grip screws and open the cover — the terminal screws stay captive.
  2. Strip the flex to length; do not nick the conductors.
  3. Terminate to the colour code: brown → L, blue → N, green/yellow → E (the terminals are marked on the body).
  4. Tighten the terminal screws, then clamp the outer sheath — not the cores — under the CORD GRIP.
  5. Close the cover and check the fuse rating matches the appliance.

Three safety points:

  • The fuse protects the flex, not the appliance — a 13 A fuse in a lead for a 5 A appliance protects nothing. Match the rating to the cable and load (3 A / 5 A / 13 A).
  • The cord grip clamps the sheath. Clamping the cores transfers strain to the terminals — the classic failure behind burned plug tops.
  • The longer earth pin opens the shutters first — on the socket side, that interlock only works when the earth connection is actually made.

Full colour-code background is in our BS 1363 explained guide.

4. The Certification Stack Behind One Plug

  • Plug body: BS 1363-1, independently tested — moulded markings carry the standard (BS 1363/A), approvals (UKCA, CE) and ratings.
  • Finished lead: once the flex is fitted, the assembled unit is judged against BS 5733 — the plug certificate is the component basis.
  • Gulf export: G-Mark on the product family; Saudi Arabia additionally runs the SABER route (see our SABER step-by-step guide).
  • Factory: ISO 9001 quality system, full in-house terminal and fuse QC.

For importers the takeaway is simple: the paperwork you present at customs is only as good as the component certificates behind it — which is why we supply model-level reports with every PMG order.

5. Channels: Who Buys This and How

  • Electrical trade counters — the 20 pcs/box is the counter unit; six colours let a counter cover every customer preference without custom moulding.
  • OEM cable assemblers — carton programmes (12 boxes/ctn) with optional logo printing on the back panel.
  • Maintenance & repair — the repair trade buys by colour-matched or standard stock; the fuse is replaceable, the body is reusable.

One-line RFQ template: "PMG 13A rewireable plug top, BS 1363/A, [colour], brass terminals + cord grip, UKCA/CE/G-Mark, 20 pcs/box, OEM branding if required."

Sourcing rewireable plug tops? Add PMG to Inquiry List — or browse the PMG product page / request a formal quotation. Six colours from stock tooling, 20 pcs/box.

Frequently Asked Questions

What is the difference between a moulded plug and a rewireable plug top?

A moulded plug is factory-fixed to its cable and cannot be opened. A rewireable plug top has screw terminals and a cord grip — the user fits the cable, inspects the termination, and can replace the fuse. Moulded suits factory-assembled appliances; rewireable suits electricians, OEM cable assembly and the repair trade.

Which colour options does the PMG come in?

Six stock variants from the same certified tooling: teal, black, white, orange, orange-black and white-black. Colour selection needs no mould fee — it is a stock option. OEM logo printing on the back panel is available.

Which fuse rating should I fit?

Match the fuse to the flex and load, not to the plug: 3 A for lamps and small electronics, 5 A for mid-size appliances, 13 A for high-load leads. A 13 A fuse in a lead for a 5 A appliance protects nothing — the fuse exists to protect the flex.

What certifications does the PMG carry?

The plug body is certified to BS 1363-1 with UKCA and CE marks, and the family carries G-Mark for Gulf export (Saudi Arabia additionally via the SABER route). The factory runs an ISO 9001 quality system with in-house terminal and fuse QC.

Can I order the PMG with my own branding?

Yes — OEM logo printing on the back panel, colour selection from the six stock variants, and custom packaging. Packing is 20 pcs/box, 12 boxes/ctn; MOQ and branding terms are confirmed in the formal quotation.

Sources BS 1363-1 plug standard (BSI) · BS 1362 fuse standard · BS 5733 assembled-extension practice · UKCA marking guidance · G-Mark (GSO) programme · Product specifications and packing data: PMG series, Guanglong Electrical — BS 1363 manufacturing since 1989.

Related Series in This Guide

Selected 0 series