
Glow-wire · Hipot · Switch endurance · Withdrawal force · Pin gauging · Burn-in — six verification capabilities, on camera, open for visits and video calls.
Extension sockets are live electrical products — flammability, hipot and endurance cannot be taken on a supplier's word. All 10+ instruments are calibrated yearly by third-party metrology institutes, with certificate numbers on file — traceable instruments make trustworthy data.
Housing and shutter plastics pass glow-wire flammability testing on every batch — non-flame-retardant live-part housings are the biggest fire risk in power strips.
Hipot and insulation tests on finished units, one by one — no pass, no shipment.
Individual switches cycled continuously — sticky or dead switches are the most common complaint, pressed out before shipping.
Too loose runs hot, too tight is hard to use — force measured, must sit inside the standard window.
Socket spacing and shutter travel checked every batch — a fraction off and BS 1363 plugs won't seat.
Finished goods run powered in bulk — early failures screened out before packing.
All photos taken in our own lab and burn-in area. Factory visits and live video walkthroughs welcome.

Housing and shutter plastics are glow-wire tested batch by batch — only material with a pass result enters production. Non-flame-retardant live-part housings are the biggest fire risk in power strips.

Housing plastics verified against drops and knocks — no cracking, no exposed live parts.

Every finished unit wired to the tester — insulation between live parts and housing verified.

Individual switches cycled continuously; touch-screen sets cycle count, auto-stop on failure.

Too loose runs hot, too tight is hard to use — force measured inside the standard window.

Whole batches run powered before packing, logged by technicians — early failures screened in-house.

Withdrawal force tester, regulated power supplies and measurement instruments — covering the product’s full life cycle.
All 10+ instruments are on a yearly calibration plan (third-party metrology institutes including Guangdong Jiangmen Supervision Testing Institute of Quality & Metrology — certificate numbers on file). Main items and equipment below — pass values follow the certified model’s specification.
| Test Item | Instrument (Model) | Calibration |
|---|---|---|
| Glow-wire flammability | Glow-wire Tester SH5111 | Yearly calibration · certificates on file |
| Hipot / electric strength | Withstand Voltage Testers × 6 (LK2670AX × 5 · SH2100) | Yearly calibration · certificates on file |
| Insulation resistance | Insulation Resistance Tester SH2400 | Yearly calibration · certificates on file |
| Grounding resistance | Grounding Resistance Tester SH2301 | Yearly calibration · certificates on file |
| Switch / plug-socket endurance | Plugs & Sockets Life Tester SH9401A | Yearly calibration · certificates on file |
| Load & temperature rise | Power Load Counter SH6301B · Temperature-Rise Tester SH9408 · Patrol Instrument PK-8 | Yearly calibration · certificates on file |
| Roller drop | Roller Drop Tester SH9205 | Yearly calibration · certificates on file |
| Environmental | Constant-Humidity Chamber LRH-100 · Drying Oven DHG-9053A | Yearly calibration · certificates on file |
| Dimensions / force | Calipers × 4 · Micrometers × 2 · Force Gauge HP-500 · Torque Screwdriver | Yearly calibration · certificates on file |
| Plating thickness | ET Electrolytic Thickness Gauge ET-1 | GB/T 4955 / ISO 2177 practice |
Extension Sockets & Power StripsUK 13A extension leads, surge-protected power strips with US…
Plug Adapters & Travel AdaptersUniversal and UK 13A plug adapters, travel adaptors with USB…
Plug Tops13A UK fused plug tops and South Africa 15A plug tops — full…
Wall Sockets & SwitchesWall-mounted sockets, switch panels and UK plug tops with US…
Cable Reels & Extension Drums4-way cable reels with overload protection, 13A UK standard…Visit us in Foshan, join a live video walkthrough of testing, or request test reports with your inquiry — the lab is open to customers. That is what stands behind "factory direct".
Request a Quotation — Reply in 24 h →UKCA · BS 1363 · CE · ISO 9001 · G-Mark · SASO · ECAS · SIRIM · Safety Mark. Current certificates are shared with every quotation — just ask.
About Our Certifications →Copper stores, our own wire line, a full mold shop, injection and assembly — six processes under one roof.
Take the Factory Tour →Your logo, your packaging, your socket layout and USB configuration — quoted from an existing mold or a new one cut in-house.
Explore OEM / ODM →